Single CPU Cooler GELID Sirocco keeps its cool factor! The latest single-tower CPU cooler from GELID\u2019s lineup is hitting hard. What everyone is looking to know is how well it performed.\r\n\r\nThe Sirocco CPU Cooler will fit most of AMD's and Intel's sockets.\r\n\r\nIntel: Socket 775, 1155, 1156, 1366, 2011, 2066, 1150 & 1151\r\nCPU: All Pentium D\/ Pentium 4\/ All Celeron D\/ All Pentium Dual-Core\/ Extreme\/ All Core 2 Extreme\/ Core 2 Quad\/ Core 2 Duo, Core i5, Core i7, Core i9\r\n\r\nAMD: Socket AM2\/ AM2+\/ AM3\/ AM3+\/ AM4 \/ FM1 & FM2:\r\nCPU: All Athlon 64 X2, Athlon 64, All Athlon II, All Sempron, Phenom, Phenom II, All A-Series AMD APU, All Ryzen (AM4)\r\n\r\n\r\n\r\nThe Sirocco is compatible with most modern CPU sockets from both Intel and AMD, such as LGA 115x, LGA 2011 and AM4.\r\n\r\n\r\n\r\n\r\n\r\nIf your mobo doesn't have a 12v RGB LED header, a simple Molex-powered RGB controller is included in the package. The provided Molex adapter offers control linked to it.\r\n\r\nThe Sirocco Features:\r\n\r\n \t\u25cf Advanced Copper-Based Heatsink\r\n \t\u25cf 6 U-Stacked Power Heat Pipes\r\n \t\u25cf Soldered Heatpipes & Fins\r\n \t\u25cf Shark-Tooth Edge Fins\r\n \t\u25cf Smart High-Pressure RGB LED Fan\r\n \t\u25cf Enhanced Mounting Kit\r\n \t\u25cf High-Class Nickel Plating\r\n \t\u25cf TDP 200W Support\r\n\r\n\r\n\r\n \r\n\r\nOne of the good things is that with the new design implementation, RAM sticks with tall heat spreader have all the clearance they need. The Sirocco is the perfect addition to any system. If you take a close look at the heat pipes you can easily how well dispersed they are in the cooler. This allows for better dissipation of the heat generated by the CPU.\r\n\r\n\r\n\r\nThe included Radiant fan with the cooler will ensure that you get the maximum amount of airflow while providing some interesting RGB illumination effect. The drives itself to 1800 RPM versus the typical 2000 RPM we normally see. The 7 blades shark-tooth design allows for better airflow. Around the edges of the motor, you'll be delighted to see that there's a total of 9 LED's which drives this colourful fan.\r\n\r\nThe speeds for the fan are controlled via a 4-pin PWM fan header, while the other 4-pin 12v RGB LED header is responsible for the lighting effects. In case you don't have the 12v header you can use the adapter provided in the kit. The small anti-vibration rubber pad inside the box can be placed on each corner to prevent rattling noise between the heatsink and the fan frame.\r\n\r\nLet's have an overview of the coolers performance.\r\n\r\nTo test out the performance and how well it can cool AIDA64 is used to run a CPU stress test. Cinebench R15 is used to simulate real-world CPU load (like video-editing or rendering). It will be run continuously for three times. The highest CPU package temperatures are recorded. Ambient temperature is around 21\u00b0C.\r\n\r\n \tCPU: AMD Ryzen 5 2600 @ 3.9 GHz (65W TDP)\r\n \tMotherboard: GIGABYTE GA-AB350M-Gaming 3\r\n \tCase: CORSAIR Carbide SPEC-06 RGB\r\n \tFans: ICETEK 3In1 Kit RGB LED Case Fans\r\n\r\nThe CPU was kept at around 29\u00b0C to 32\u00b0C at idle. When the fan was spinning at 900 RPM (50% speed), the CPU temperature reached 57\u00b0C in the AIDA64 stress test. Pushing the fan at 100%, the temperature dropped 5\u00b0C to 53\u00b0C. I can't complain about the temperatures.\r\n\r\nCinebench R15 provides a more realistic real-world situation, which produces less heat than the stress test. The maximum CPU temperature was sitting at 51\u00b0C, with the fan set to 50% speed. Higher fan speed yielded a 2\u00b0C reduction in temperature at 49\u00b0C.\r\n\r\nThe Sirocco CPU Cooler from GELID did very well compared to other coolers in the same class. The performance and cooling ability we're slightly similar or better in some cases. Compared to the top TIER brands that everyone love and typically get, this is on par if not better. The difference is not "crazy" substantial, but you do get some pretty good results.\r\n\r\nThe included Radiant fan drives lots of airflows. The fan was as smooth as the operator, the noise was kept to a low level. Fan noises were noticeable when driving the RPM to its maximum. The 9 LEDs installed on the fan provides pleasant lighting effects, with bright and vivid colours.\r\n\r\nComing in at $69.95 from Amazon the price is within reason for this caliber of cooler.